Sliding patio doors actually were adopted in Western architecture from Japan, and while there are two main types of sliding patio doors, almost everyone is familiar with the first type. It is made of two panels. One panel remains stationary, and the other slides back and forth to allow access to the outside of the building. They can open by sliding to either the left or the right, depending upon the design of the building, and when a person stands outside of the building and looks at the door, a left-handed door is one that has the left panel movable.
Sliding Glass Patio Doors
A right-handed door has the movable panel on the right. Traditional sliding glass patio doors have two panels, and one panel is stationary, while the other slides back and forth in a track next to the stationary door. If it is a sliding glass patio door, the glass is in a frame that slides back and forth along the track.
The Pocket Door
The second type is not as common in Western architecture and it is known as the pocket door. When it is opened, it slides into a pocket in the adjoining wall and completely disappears from view. Disappearing doors are generally chosen for rooms that are intended to give a wide-open sensation, and the glass panels all slide into the adjoining walls to leave an unobstructed view. Furthermore, these disappearing doors do not have to slide horizontally, and with the use of remote controls, they can slide vertically into the walls above the doors.
Trackless sliding glass patio doors have their tracks on hidden above them, and they hang down. They disappear into wall pockets when they are open, and when they are shut, they fit down into the floor. However, they are not recommended for extremely cold climates because they are not very weather proof.
When used for access outside, sliding patio doors make the room to be more spacious, allow more light to enter the room, and allow fresh air inside, and when used inside a building, they allow auditory privacy without sacrificing a visual connection to what is going on elsewhere. However, one of the concerns of having these doors is that they can be easily entered by a home invader; therefore, when choosing a sliding patio door, you should look for ones that offer locks, anti-lift blocks, and security bars.
How To Install a Sliding Patio Door
The Replacement Sliding Patio Doors
Occasionally it becomes necessary to install a replacement sliding patio doors. Here are the basic steps that one can expect to go through to get the job done:
- Remove the interior and exterior trim that surrounds the door so that the door itself can be removed.
- Remove any excess pieces so that the door is not as heavy to lift.
- Remove all the nails and screws that are holding the old door in place. Once they are gone, use a hammer to tap the door out of the wall.
- Measure the opening to be sure that it matches the new door. Check that all sides are level and straight.
- Use the appropriate materials to make sure that the opening is water and weather proof.
- Carefully lift the new door into the frame, placing the bottom in first.
- Make the new door secure by using nails and screws.
- Replace the interior and exterior trim around the door.
Attach any locks, handles, or grills that have come with the door.
Sliding Patio Doors Inspirations
Comments Off on The Secrets of Sliding Patio Doors